Wood Processing Factory Boiler

In recent years, the total wood consumption was increased year to year. Wood material is generally processed into door, furniture, artificial board, and paper, etc. However, the environment situation is increasing serious, many countries impose a ban on cut down trees. Thus, wood resource will be relatively short. In wood processing factory, there will be large amount of wood waste, Sitong biomass boiler could burn these wood waste, and offer sufficient heat for wood processing, to increase the process efficiency. Sitong Boiler has offered hundreds boilers to different type wood processing industries, we could design the boilers based on specific requirement.

Plywood Factory
Furniture Factory
Floorboard Factory
Board Factory
Wood Door Factory

Want to Get Boiler Recommendation for Your Factory?

Ask for Boiler Information

Send Inquiry

Boiler Used in Wood Processing Industry

In wood processing industry, boilers are widely used for different wood processing industries, such as drying, hot-pressing, curing, dyeing, sterilizing, etc. Otherwise, autoclave is also used with steam boiler for wood preservation. Heat energy can be produced in various ways in the wood industry. While industrial boilers are used mainly to dry chipped wood and fibers, presses can be heated with thermal oil heaters and process steam is provided by steam boilers. In addition to conventional natural gas and fuel oil, wood dust is also used as fuel for firing thermal oil boiler or steam boiler. Using biogenic fuels from in-house production reduces fuel costs and saves fossil resources. It also significantly reduces overall plant emissions.

Industrial Natural Gas Fired Steam Boiler

Biomass Fired Thermic Fluid Heater

Wood Fired Moving Grate Steam Boiler

SZL Series Coal Fired Steam Boiler

Autoclave for AAC Plant & Wood Preservation

Sitong Boiler Projects in Wood Processing Industry

Boiler Model: DZL10-1.25- T

Rated Pressure: 1.25Mpa

Fuel: Wood

10t DZL Wood Fired Steam Boiler for Bangladesh

We have kept in touch with the Bangladesh customer for about 2 years. After 2 years exploration, the cautious customer finally determined Sitong Boiler as his boiler supplier. He needs a higher efficient boiler to offer high quality steam for rubber wood processing, the temperature needed is around 170℃.

2t Biomass Boiler Used in Wood Processing Industry

DZH Series biomass steam boiler is used in Jordan wood processing factory, steam is used for steaming wood and drying wood. The steam boiler capacity is 2ton, and the pressure is 0.7Mpa.

Boiler Model: DZH2-0.7-T

Rated Pressure: 0.7Mpa

Fuel: wood chips

Boiler Model: YGW - 3500MA

Design Pressure: 1.1 Mpa

Fuel: wood waste scrap

3500KW YGW Thermal Oil Boiler for Indonesia

In June 2015, Indonesia customers Visited sitong Boiler Factory, they would like to choose a boiler for plywood production, and use the waste scrap as the fuel. After visiting, they choose the YGW thermal oil boiler with reciprocating grate

Inquiry

Contact us now if you have any question about our company and products[email protected]. Any of your inquiry and suggestion will be highly appreciated. We will keep your information completely private.

Name*		Tel*
E-mail*
Message*